Loading and unloading Safety ppt

Loading Unloading PowerPoint PPT Presentations - PowerSho

  1. The major parts/equipments in a typical Catalyst Loading System will include-vibrating screens, Baroscopic Camera, weighing machine, breathing air compressors, safety mask, communicating system etc., and catalyst unloading system would include cyclone separator, bag house filter, vacuum source, control panel, filter cleaning system, conveying piping, valves etc. Addition or deletion of the features can be done according to customer's requirement
  2. Securing Cargo - Load Responsibility. Load heavy articles first- place equal weight on the right and left side. Center the load to keep vehicle load threshold high in both sideways directions. In mixed, stacked loads, the larger and heavier items should be placed on the bottom. Weak or crushable items should be placed on top, or behind.
  3. Risk Controls - Loading / unloading Traffic Management Question how we can increase the hierarchy of control level Define areas that are high risk Physical controls that restrict access of pedestrians into high risk areas. Very important to keep out any through-traffic Minimise loading numbers in the area - people, forklift
  4. 2. Adequate lighting in loading dock area and trailer to prevent slips and collisions. 3. Equipment (ex.Chock) should be used to anchor the trailer from moving. 4. No one is to be in the trailer as a fork lift enters/exits during loading/unloading. Trailer loads can shift, potentially able to pin a worker. 5
  5. ( Loading and unloading requires all your concentration. Don't take your eyes off what is happening outside the bus. ( If there is a behavior problem on the bus, wait until the students unloading are safely off the bus and have moved away. If necessary, pull the bus over to handle the problem

Safe Loading and Unloading Checklist Use this checklist to manage risk during loading and unloading procedures. All personnel are required to follow this process during loading and unloading effectively prevents movement of trucks and trailers during loading, unloading and boarding by hand trucks and powered industrial trucks. 2. All of the mechanical equipment shall be installed, maintained and used as • Loading Dock Safety Assessments PowerPoint Presentatio Loading and Unloading Procedures 14) NEVER RUSH when loading and unloading students. Concentrate on what you are doing and don't get lazy or complacent by deciding to skip over part of the loading and unloading process. Proper loading and unloading can be the difference between life and death. Even if your route is running late, don't hurry loading/unloading operation and explain it carefully to relevant workers, such as the truck driver or relevant loading crew. Load Plans should clearly identify: The packs of product to be carried. Equipment and loading/unloading practices required. Special measures or procedures taken to address all of the identified risks

loading/unloading process should vacate the area, there should be no chance of vehicles coming into contact with stray cables or wires. Trailers must be parked on firm level ground so the load can be positioned evenly. A safe waiting place should also be available to all persons on a site that are not involved in the loading / unloading until. Load and Unload Correctly to Prevent Injuries Use forklifts, dollies, and other aids or get help rather than lifting by yourself whenever possible. Never try to lift skids and pallets alone. When you do lift, bend your knees and keep your back straight so your legs do the work (not your back) Unloading - Safety Showers ANSI Z358.1-2004 Revision of ANSI Z358.1-1998American National Standard for Emergency Eyewash and Shower Equipment 6.4.2 States Be in accessible locations that require no more than 10 seconds to reach. The eye/face wash shall be located on the same level as the hazard and the path of travel shall be free o The loading and unloading of petroleum is a complex and potentially dangerous operation. Following basic safety practices can help to reduce the risk of an incident. The guidelines below are not exhaustive, and a loader's actions should always be informed by current safe practice and all of the conditions of present in the loading area

Loading and unloading cargo are activities which heighten the chance of workplace injuries. Some of the most common workplace injuries related to vehicle loading and unloading include: Sprains and strains from improper lifting or handling of carg 3. Policy and Procedures w/ Job Safety Analyses 1. Loading and Unloading procedures with periodic reviews 2. All employees require initial training with documentation 3. Annual refresher training 4. Minimum PPE: high vis vest, safety shoes, safety glasses, hearing protectio Injuries from loading and unloading pallets If your work involves the manual loading of objects using pallets, it's important to ensure you aren't forced to frequently adopt awkward postures through bending, twisting and reaching. These activities can cause debilitating injuries to the shoulder, lower back and knees

1. A positive mechanical means to secure trucks or trailers to a loading dock is allowed provided the system is installed and used in a manner that effectively prevents movement of trucks and trailers during loading, unloading and boarding by handtrucks and powered industrial trucks. 2 • Loading • Securement • Transporting • Unloading This document provides safety guidance for each of these functions for drivers and others involved in transporting and handling pipe used in the construction of pipelines. Employers are responsible for ensuring that drivers and other workers are properl Loading and unloading safety Many facilities use lift trucks to move supplies and other heavy items. Using lift trucks can be very hazardous if safety procedures are not in place, practiced, and communicated. You can use the following guidelines to help prevent accidents and injuries while using lift trucks Loading and unloading simpler System, the engine behind: simply requires one pump system and a comprehensive pipeline of tank fit the front to the back. The engine in the Middle: need 2 sets of loading and unloading system, because with separate engine room. 4. It only takes one hand oil tight, i.e. the limit load and engine room 5 2. Ensure all personnel receive proper load safety training and refresher safety training. 3. Establish and enforce standard operating procedures for moving cargo. 4. onduct regular safety meetings, toolbox talks, and safety trainings to address hazards. 5. Only permit workers trained in proper load handling to load and unload trucks. 6


The act of loading and unloading a trailer forces the forklift operator to interact with another piece of equipment (trailer) and another human (truck driver), which increases safety risks and hazards. Dock Safety: Common Hazards. Trucks and trailers can creep away from docks while loading and unloading due to the weight and force of the forklift ProcESS For loAdING ANd uNloAdING FlAtbEdS 4 Safety First! T 2 2 3 3 3 3 3 3 3 3 3 3 3 3 2 2 48 ft. flatbed, top view. ISRI/AF&PA ShIPPIng guIde 10 This tag, or one like it, can be used to identify your bales to the mill. All bales should be tagged as shown below other personnel involved in the loading and unloading operations of all trucks and trailers in Port controlled areas including the wharf, irrespective of the nature of the goods. 1.3. References • Loading, Unloading Exclusion Zones Guidelines (LUEZ) V1 November 2010. Safety Assist

Pipe Loading and Unloading Safety During Construction Activities Document: CS-S-15 Revision: 0 Last Revised: August 28, 2017 Page 5 of 10 6.3.10 If only one worker is on site, he/she will verify that no one is located around the controlled access/exclusion zone, or in the travel path of the vehicle, then will release the driver.. when and where loading/unloading is permitted. This will be indicated through the local signage network - Make sure you're clear of other traffic, pedestrians and people not involved in loading or unloading - Spread the load as evenly as possible, during both loading and unloading. Uneven loads can make the vehicle or trailer unstabl

Vehicle loading and unloading can be hazardous, but with a simple plans and procedures like the custom ones provided by industrial athletic experts at Work-Fit, the risk of employee injuries can be lowered substantially. Help keep your employees and business safe with clear, concise vehicle loading and unloading practices EMS SAFETY 6 occurred, however, 15 events were during unloading, five loading, and three during surface movement. Of contributing factors, 14 of 23 were due to stretcher/ambulance safety latch issues and only two due to uncooperative patients. Reported EMS injuries included two knee and two back injuries. (Goodlow, Crowder, Arthur, & Thomas, 2012 The pallet turntable keeps the pallet load point as close as possible to the operator, preventing them from having to stretch and reach across a pallet. This also saves them from having to walk around a pallet whilst loading and unloading, thus considerably reducing the risk of tripping while carrying loads. Safety skirt Chocking and blocking prevent accidental or unintended movement of trucks and cargo while loading and unloading and while performing service or maintenance. Chocking the wheels of a truck, trailer, or tractor prevents the wheels from rolling, eliminating runaway equipment that can injure workers

occur during loading and unloading operations. Further detailed analysis shows that in 90% of these cases, the human factor is the root cause. It is therefore essential to increase safety during loading and unloading. These guidelines offer best practice guidance regarding the safety of loading and unloading PROBLEM: Catastrophic Trailer Separation Accidents 4. Trailer Pop-Up / Up-Ending Pop-Up: the weight of a forklift sends the rear of the trailer forward and down, causing the nose to rise. Up-Ending: the weight of a lift truck sends the trailer's nose down, causing the rear end to move up and away from the building. Remember, positioning of the rear tandems is important

Loading Dock Safety - SlideShar

Transportation, Loading and Unloading of PCC Pole. 2 Learning Objective Correct Method of Loading PCC Pole Step 6: •Safety cone is placed and tied to the end of PCC pole Step 5: •Tie the pole with a rope firmly and fix additional clamps vertically to fix in a position. The pole will not slip o Section 6 - Loading/Unloading Rules, Regulations & Charges DEFINITION - LOADING AND UNLOADING 600 Loading and unloading means the services of loading or unloading cargo between any place or point of rest on a wharf or terminal, and railcars, trucks, or any other means of land transportation and barges The fundamental safety philosophy which ensures that an item of equipment can be operated, or an operation performed, in a safe manner with risks that area as low as practicable Preventive measures i.e. prevention of the initiation of fire or explosion. Manual checks on individual cans. Loading and unloading wrapping machines. Remove. Loading and Unloading Safety • Establish and know where the danger zone is. This zone can vary with each load. It may be as much as 40 - 50 feet around the truck or as small as 5 - 10 feet in a concentrated space. Factors that need to be considered are sizes of carg the loading/unloading area. Provide enough space to operate mobile plant, such as forklifts and trolleys. Design loading docks to accept vehicles of varying dimensions, and provide easy access andgress. e Ensure the loading dock has fall prevention devices (eg guard rails). Ensure vehicles can be loaded and unloade

When we think of safety in the transportation industry, we automatically envision Ontario's roads, streets, and highways. However, safety on loading docks is also important. Loading docks are busy places with vehicles and equipment moving about both inside and outside of the facility. When freight is being moved, time is of the essence Loading should allow for safe unloading. Loads must be suitably packaged. When pallets are used, the driver needs to check that: They are in good condition. Loads are properly secured to them. Loads are safe on the vehicle. They may need to be securely attached to make sure they cannot fall off

Determine the optimal loading equip-ment and method(s); Determine the best method(s) to se-cure the defined cargo (blocking, direct lashing, top-over lashing, or combinations of method(s); 75º - 90º MAX. 45º 18t 18t WHILE LOADING AND SECURING THE CARGO BEFORE LOADING CARGO ON A VEHICL and Unloading Trucks and Trailers . Loading and unloading materials, goods, and products from trucks are daily activities in many businesses. These activities are also a regular and frequent source of workplace injuries and fatalities. In Washington State from years 2005-2010: 12 workplace fatalities occurred during truck loading or unloading Loading, unloading and moving materials/goods from trucks are daily activities that, when done unsafely, can result in serious accidents and expensive insurance claims. Whether you are a small business owner or a large enterprise, an unsafe dock affects the trailer trans-porter, the dock receiver/loader and/or any person within the dock work space General loading & unloading safety considerations; Specific loading & unloading activities; Safe loading and the law; Course objectives: By the end of the session, drivers will have a thorough understanding of the risks presented by loading and unloading and its associated best practice, as well as their own responsibilities on the road Loading / Unloading mobile plant Unsafe deck and/or ramps Unexpected movements Fall / Roll Over Person hit by mobile plant Loads not properly restrained Person struck by load restraints Only a competent person may load / unload plant and equipment from a delivery vehicle. Check the safety of the deck and/or ramp

Vehicle Loading and Unloading: Keeping Your Workers Safe

Loading and Unloading Safely Around Trucks. When mobile plant and vehicles are physically moving within workplaces there is a high risk of injury or even death is the hazards and associated risks are not managed correctly. The most common workplace vehicle accidents happen when reversing, loading, unloading and during pedestrian movements Title: Microsoft PowerPoint - Boxcar Unloading Safety Checklis R1t.ppt Author: b360889 Created Date: 12/29/2004 4:14:36 P

The loading platform must be designed to accommodate these different configurations. The varying heights of bulk trucks pose a serious fall hazard if the safety bridge is not sized properly. Truck Spotting Correctly spotting dry bulk trucks at each station is critical for the safety and efficiency of the loading/unloading operation Is the leveler or dock plate capacity adequate given typical load weights, lift truck speeds, ramp inclines, and frequency of use? OTHER Are truck drivers provided with a place away from the loading dock to wait while their trailer is being loaded or unloaded? Are truck engines turned off during the loading or unloading operation Following these guidelines can help plant personnel eliminate non-accident releases while loading and unloading tank cars. This guide is intended to assist shippers and receivers of hazardous materials in reducing NARs (non-accident releases) by outlining the recommended methods for the safe loading and unloading of non-pressure, general service, and pressure tanker tuck cars STORAGE AND HANDLING OF PETROLEUM PRODUCTS AT DEPOTS AND TERMINALS Prepared by FUNCTIONAL COMMITTEE OIL INDUSTRY SAFETY DIRECTORATE GOVERNMENT OF INDIA MINISTRY OF PETROLEUM AND NATURAL GAS. Dharmesh Mistry. Download PDF. Download Full PDF Package. This paper. A short summary of this paper

PPT - Loading and Unloading Rubber Band Discussion Points

Loading and unloading at the loading dock. 4. Preparation of goods during the process of unloading. 5. Checking items vs. documents. 6. Entering data into the system (GRN). 7. The legitimacy of the document. 8. Exit the warehouse Loading and Unloading Signs Warehouses are usually large, high traffic areas for trucks to go about the business of picking up and dropping off business freight at loading docks . Trucks, freight and people on the move throughout each day need direction and safety reminders

OSHA eTool. Describes the hazards associated with working in sawmills. Included is a section, Receiving and Storing, which depicts safe log truck loading and unloading procedures. Beverage Delivery. OSHA eTool. Describes the hazards associated with beverage delivery. Includes sections on Delivery Trucks, Hand Trucks, and Water Delivery How to Safely Load and Transport Heavy Equipment. The safe and legal transportation of heavy cargo and construction equipment is no easy task. When handling some of the most massive pieces of machinery ever built by humankind, a set loading, transportation, and unloading protocol is not only a best practice — it's the only practice Loading or Unloading Pallets. Automatic or user controlled level loaders adjust in height as boxes are added or removed allowing the operator minimal lifting. Many units feature turntables to allow for nearside loading with no walking around the pallet

Follow safe loading and unloading procedures. It is difficult to list all of the specific safety procedures to follow because so many types of loads are moved on flatbed trailers. However, there is a set of procedures that can reduce your risk of falling when loading or unloading your flatbed trailer. Know the danger zon design, to personnel safety precautions, equipment maintenance and preparation, transportation, and loading and unloading operations. The Ethylene Oxide Panel supports policies based on the best available science and research on health, safety and environmental issues arising from the production, use Loading and unloading a trailer with a forklift or powered industrial truck (PIT) should normally be a safe operation. But if the trailer isn't properly secu.. 1 day Certificate of Training Course Summary. This loading and unloading course aims to instruct the operator in the correct safety procedures for the loading, unloading and securing of plant machinery prior to or following transportation by road

Loading and unloading pallets safely Plain Pallet

Workers who fail to follow proper safety procedures when loading and unloading cars can find themselves injured by the contents of those cars. And when procedures regarding handbrakes, chocks, and other retention devices are not observed, an unattended railcar may become a deadly weapon that accelerates quickly and can slam into buildings. 4 Mount Communication Lights. 5 Install Barrier Gates. 6 Use Dock Levelers. 7 Create a Regular Maintenance Routine. 8 Train Employees. 9 Other best practices for loading and unloading. The loading and unloading of cargo is a dangerous process that can cause serious injury or even fatality to warehouse workers if it is not performed with care

Portable loading ramps, also called portable loading docks, forklift ramps, mobile ramps, or yard ramps, provide access to semi-trailers and boxcars from ground level. They can be used in places where permanent loading docks do not exist, such as farm fields or construction sites, or as a cost effective way to expand material handling capabilities OSHA (Occupational Safety and Hazard Administration) regulates all loading and unloading activity occurring at plants, stores, shipyards, warehouse and other locations. The federal agency warns workers to remain cautious when preparing the trailer and dock for loading and unloading and how to properly use forklifts and equipment to load or. The credit goes to three things: tanker design, safety equipment, and driver training. Tanker Design. With roughly 1.22 billion tons of gasoline, Avgas, diesel fuel, Jet A, and other chemicals being hauled each year in tanker trucks that can each hold 10,000 gallons of product, tanker design is vital when preventing accidents

Ppt Loading-and-unloading-trucks Powerpoint

(d) When unloading through the bottom outlet of a car equipped with an interior manhole type cover, and in each case where unloading is done through the manhole (unless a special cover with a safety vent opening and a tight connection for the discharge outlet is used), the manhole must be protected by asbestos or metal covers against the. Safe loading/unloading. Approach the load squarely with forks level. While not part of the pallet truck: attention should be given to the condition of pallets. Loads should not be shifted by butting with the truck. Ensure the forks are under the pallet all the way and the load wheels are not contacting the pallet frame. Raise the load for. Rail Car Unloading Author: Larry R Harshbarger Last modified by: Larry R Harshbarger Created Date: 4/8/2008 2:40:45 PM Document presentation format: On-screen Show Company: Heritage Group Safety Other titles: Times New Roman Arial Default Design Rail Car Unloading PowerPoint Presentation PowerPoint Presentation PowerPoint Presentation. Loading and unloading slit coils_AMDS_HSE_BP_P_07.0 Page 3 of 7 1 Objective and scope of implementation This technical and /or organizational safety standard defines at AMDS the minimum rules for loading and unloading of slit coils with horizontal axes in danger of tipping over, on trailers with coil-dumpers, regarding the table below 3 Using the following personal protective equipment prevents needless injuries when manually moving materials: Hand and forearm protection, such as gloves, for loads with sharp or rough edges. Eye protection. Steel-toed safety shoes or boots. Metal, fiber, or plastic metatarsal guards to protect the instep area from impact or compression

Loading and Unloading Safety Markel Specialt

1. Maritime Technical English Ship and Port Loading and Unloading Equipment Edited by C sar Rivas. 2. Equipment used for loading/ discharging operations: e.g. cargo cranes, side-loading systems with conveyors, sideshifters, elevators, belt conveyors, roro cargo handling gear and cargo pumping system. 3 Bottom Loading The loading and unloading of petroleum is a complex and potentially dangerous operation. Following basic safety practices can help to reduce the risk of an incident. The guidelines below are not exhaustive, and a loader's actions should always be informed by current saf 5. Load Trucks for Good Balance and Stability. A. Place heavy objects at the bottom. B. Position the load forward over the axles so the truck, not the handles, carries the weight. C. Stack objects only to a height that you can see over while walking. D. Make sure the load is stable and won't shift or fall


Loading and unloading may also involve equipment such as forklifts or cranes. Drivers should not operate this equipment unless they are competent to do so based on their training, experience, and knowledge of occupational health and safety legislation. Health & Safety Magazine Vol. 11 Issue 2 www.ihsa.ca. Title: Safety Talk: Securing Load Clearing Up The Question Of Chocking Em Up At The Loading Dock. January 22, 2020 General, Transportation, OSHA. There's cargo coming in and freight going out at a fast and furious pace in Shipping & Receiving. With deadlines and commitments and no possibility to make time stand still, oftentimes drivers are eager and itching to leave the dock. tional safety is continuous work. More industry experience contrib-utes to more safety. This paper focuses on the specific helicopter operation that comprises the loading/unloading task of a slickline/ wireline job on an offshore platform. The discussion was carried out as a case study that was based on actual operational experience. Condition Loading and unloading vehicles - ersionV I - ULY 2014 10 Email: DeliveryHub@highways.gsi.gov.uk Hard shoulder Guidance Planning loading and unloading Load Weight and security Vehicle operators / drivers are bound by law to pay attention to the weight, size and security of any load carried on their vehicle or trailer attached to it. The law require General Helicopter Safety Hot loading - Loading the aircraft with the engine running and blades turning Allow Life Flight team to direct loading and unloading of equipment and patients at all times Microsoft PowerPoint - Life Flight Pro Fly-along powerpoin

PPT - BSA 30 Minute Pistol Briefing PowerPointStocksigns is the UK leader in health and safety andPPT - Struck By/Caught Between PowerPoint Presentation

loading or unloading the vehicle and if not properly mitigated could result in major injuries or even death. The following are the key loading dock hazards explored in this guide. • Drive-away • Vehicle creep • Load roll-away • Trailer tip • Water ingress Definitions DRIVe-AWAy A drive-away is when a vehicle or trailer i 2. Lifting. Get as close to the load as possible. Try to keep your elbows and arms close to your body. Keep your back straight during the lift by tightening the stomach muscles, bending at the knees, keeping the load close and centered in front of you, and looking up and ahead. Get a good handhold and do not twist while lifting FORKLIFT SAFETY TIPS Information Sheet Carrying Loads Always: Assess the load before lifting. Check weight, size, load centre and security Make sure that pallets are in good condition Observe floor loading limits Find out the weight of the laden forklift Check safe working load (SWL) of racking before placing loads onto i Health and safety 8 Loading systems 8 Control system 11 Process design parameters 13 Equipment 15 Truck Unloading 20 General 20 Grounding provisions 21 all facilities connected with bulk loading and unloading of road vehicles, rail tank wagon and on-shore facilities for loading/discharging of water bore craft Environmental Health & Safety Loading and Unloading • Never attempt to lift or carry a load beyond the rated capacity on the nameplate. • Check the weight of the load. Placing a weight on the back of a forklift to increase load capacity is extremely dangerous. • Locate the load's center of gravity Loading and unloading of containers from ship to the quay at the container terminal is a high risk activity that has high potential of creating accidents both to human as well as to property. The study is aimed to conduct safety assessment that can be used further for minimising work accidents at the port